 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Tel: 0044 (0)118 979 1238 Fax: 0044 (0)118 979 1283 E-mail: info@actcrystals.com ACT9353 The ACT9353 is a miniature low profile Clock Oscillator, housed in a ceramic leadless chip carrier with a SMD seam welded metal lid for high reliability and long term stability. The metal lid is grounded via the package to assist with EMI emission control. This 5x3.2mm packaged device is available in 1.8 ~ 5.0 volt supply voltages and with stabilities from 20ppm to 100ppm It is suitable for a wide range of applications. Taped and reeled packaging and loose quantities are available for purchase, to suit high and low volume requirements. The pads are gold plated on all surfaces to allow a variety of assembly processes, including reflow and wire bonding Specification Parameter Frequency Range Frequency Stability Operating Temperature Range Storage Temperature Range Supply Voltage Duty Cycle Symbol f0 f/f0 Topr Tstg VDD Tw/t Specification 1.000 to 50.000MHz 20, 25, 50 or 100ppm ( Inclusive of Operating Temperature,range,Supply Voltage & Load ) 0 ~ +70C & -40 ~ +85C -55 to +125C 1.8V, 2.5V, 3.3V & 5.0V 40/60% Std, ( Option 45/55% ) ( At 50% of Waveform w/HCMOS Load or 1.4DC w/TTL Load ) 1.8VDC10% 2.5VDC10% 7mA 8mA 15mA 10% VDD max (HCMOS) 90% VDD min (HCMOS) 10nS max 10TTL Load or 15pF HCMOS Load ( Std ) 10mS max No Connection Enable output Enable output Disable output : High Impedance ( 3ppm Available to "custom" order ) ( See page 2 for full profile ) 260C Max Jitter Parameter Phase 12kHz~20MHz 1 ~12.999 Period (rms) Period (pk-pk) Phase 12kHz~20MHz 13 ~ 34.999 Period (rms) Period (pk-pk) Phase 12kHz~20MHz 35 ~ 50.000 Period (rms) Period (pk-pk) VIH : 0.7 VDD VIL : 0.3 VDD 3.3VDC 10% 7mA 15mA 25mA 5.0VDC10% 10mA 20mA 30mA 5mA 7mA 10mA Please specify Please specify Please specify Please specify Please specify Supply Current (max)1-12.9999MHz IDD Supply Current (max)13-34.999MHz IDD Supply Current (max)35-50MHz IDD VOL VOH Tr/Tf N/CL Tosc Output Level `0' Output Level `1' Rise & Fall Time (max) Output Load Start-up Time Tri-state Input Voltage Aging Reflow Profile Jitter Fa 5 ppm p/yr. max @25C 10 secs fO MHz @ Please refer to table below Typical(pS) 8 10 56 5 7 45 5 6 35 Max(pS) 10 15 70 7 10 60 7 8 50 Pad finish: Au APPLICATIONS -Microprocessor clock -PDA/Notebook -Wireless applications -Instrumentation Please note that all parameters can not necessarily be specified in the same device Customer to Specify : Frequency, Frequency Stability, Operating Temperature Range, Voltage, Duty Cycle In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice. -Audio -Ethernet -Fibre channel ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 3 SK Date 29/10/07 http://www.actcrystals.com 1of 2 Tel: 0044 (0)118 979 1238 Fax: 0044 (0)118 979 1283 E-mail: info@actcrystals.com TAPE AND REEL SPECIFICATION FOR ACT9353 ( 1K Pieces per reel ) 260 In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue :2 SK Date 12/10/05 http://www.actcrystals.com 2of 2 |
Price & Availability of ACT9353
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |